BESMAK Fully Automatic 4 Column Hydraulic Compression Machine, 2000kN
Introduction
Features
General Features of Data Acquisition and Control System :
- Capacitive touch screen.
- USB port to get results directly from LCD without use of pc.
- Accurate loading with high accuracy.
- User can attach internet modem directly to LCD controller
- User can email results directly from LCD by using internet.
- User can update test software by using USB drive.
- LCD has Linux based test software.
- Minimum 7 channels. (Optional)
- Automatic calibration and adjustment.
- 1000Hz (1kHz) data acquisition speed of each channel.
- Closed loop PID and open loop control option is available.
- Results in pdf and can be converted in Excel.
- LCD controller has 4GB built-in data storage space and supports up-to 32GB.
- User friendly, easy to customized.
- Communication with PC through USB.
Technical Specification
Specification :
Standards | : | EN-12390-4 |
Frame | : | 4-column rigid construction |
Capacity | : | 3000kN |
Piston Stroke | : | 50 mm |
Low friction single-acting piston | ||
Columns are screwed to upper and lower blocks free from play, | ||
Distance Platens | : | 2x50mm,1x70mm |
to test different sizes of samples | ||
upper platen spherically seated to allow an inclination of 3°, | ||
All transmission surfaces are additionally plane &ndash parallel &ndash treated and fine machined | ||
Feasible to test | : | cube samples (150x150x150mm, 200x200x200mm) cylinder samples (100x200mm, 150x300mm), |
Maximum Daylight | 330 mm | |
Load Measurement and Control |
| |
Controller | Sematron Touch (Touch Screen) | |
7 Channels Controller with 1kHz Data Acquisition Speed | ||
Load Measuring Range | : | 4 - 100 of Total Capacity |
Speed of Load Control | : | 1 kN/s &ndash 25kN/s |
Max. Compression Test Space | : | Up to 340 mm |
No. of Channels | : | 5 |
Measurement Resolution | : | Up to 20 Bit |
LCD Screen | : | 10&rdquo Capacitive Touch Screen |
OS of The Controller | : | Linux Based |
Communication Port | : | USB |
USB Connection | Available &ndash Internally | |
Data Transfer (Report, Raw data etc.) · | ||
Communication with PC Software · | ||
For all external hardware connection. | ||
Memory | : | - 2 GB internal memory, |
- 32 GB Expandable memory with SD Card | ||
Data Acquisition | : | 1000 data per second (Different sampling speeds can be provided on demand) |
Data and Experiment | : | Can save, open and operate method |
Operating System | based test parameters. | |
Reporting Types : - By separate charts, - By serial reporting (More than one result in the same graphic) | ||
Number of Channels | : | 5 channels in total (Optional) |
- 2 Analog (Load cell, Strain Gauge, | ||
Pressure Transducer etc.) 2 channels | ||
|
| are active 2 are optional. |
- 3 Digital (Encoder, LVDT, Linear | ||
Transducer etc.) | ||
Control Type of Machine | : | Closed Double Loop PID |
Control Type &ndash | : | - Automatic and Manual Mod options, |
Loading Procedure | - Constant Load, | |
- Ramp Loading, | ||
- Step Loading, | ||
Fast Preloading | : | Available (With automatic contact |
detection.) | ||
Modulus of Elasticity and | : | Available (Optional) |
Poisson Ratio Calculations |
| |
Calibration Types | : | - Single Point Calibration, |
- Automatic calibration up to 10 Points (Machine makes automatic loading up to first calibration point and after entering reference value continues to loading for the next point.) | ||
Software Update | : | Automatically by using Flash drive , |
Report Formats | : | PDF, Excel and program raw value format |
Report Customization | : | User defined logo and test information, |