BESMAK Marshall Test Machine
Introduction
Standards : EN 12697-34, BS 598-107, EN 13108 - ASTM D1559 - ASTM D6927-06
Used for performing the stability-flow test on hot-mix asphalt paving mixtures.
Ruggedly constructed with frame to encompass the strain and loads, easy to use it is designed to operate with the minimum of maintenance.
Features
Technical Specification
Specification :
Weight | : | 70 kg |
Dimension | : | 450 x 605 x 960 mm |
Power | : | 220 V 50 Hz |
Platen Rate | 50.8 mm/minute | |
Applied Load | : | measured by a precision proving ring 50 kN capacity incorporating |
a stem brake holding the maximum reading and | ||
it is supplied with relevant calibration certificate. | ||
Capacity Load Ring | 50 kN | |
Beaking head | for 100 mm diameter samples | |
Breaking head consist of | an upper and lower cylindrical segment having an inside | |
radius of curvature of 100 mm sample. |
Include
- an electric device for automatic stop when reaching the max capacity load of the proving ring, so as to prevent any overload damage
- limit switches stopping the platen at max. and min. excursions
- flow meter with dial gauge
- Heating Bath
- Marshalll Mould
- Marshall Sample Extruder Manuel